It is a strong one-component adhesive produced with SMP technology, which cures (hardens) with the humidity of the air. It has a rigid-flexible structure. The distinguishing feature of this product is its high initial adhesion, enabling direct nail-free bonding and assembly. Within just 10 seconds of application, it can hold the adhered material in place without any additional support and cures in position.
Features
- High initial adhesion and fast grip reduce the need for mechanical support.
- Can be applied on moist surfaces and even underwater.
- No air bubbles form during curing.
- UV resistant and paintable.
- Free from isocyanate, solvent, and silicone.
Where Used
Suitable for sanitary environments and versatile enough for use in construction, automotive, marine, aerospace, and industrial applications. Commonly used in structural bonding of wall panels, insulation materials, mirrors, skirting boards, cornices, and similar materials.
Application
Apply with a suitable sealant gun between +5°C and +35°C. The adhesive thickness should be adjusted based on the materials involved. After application, materials must be joined within the skin-forming time and held in place mechanically until full curing is achieved. Curing time will vary depending on temperature, humidity, and adhesive thickness.
Shelf Life
Store in a dry and cool place. Avoid temperatures above +25°C. Shelf life of unopened packages is approximately 18 months.
