600 PU Foam

Derby 600 PU Foam is a one-component aerosol polyurethane foam that expands and cures with moisture. It is designed for use with the pipette supplied with each aerosol can.

Features

• Waterproof and paintable.
• After drying, the cured foam can be cut, sanded, painted and plastered.
• It does not contain any propellant gas that can damage the ozone layer.

Application Areas

• Installation, insulation and sealing of door and glass frames.
• Filling and sealing of gaps, large cracks and holes.
• Insulation of electrical installations and hot-cold water pipes.

Application

During the application, the ideal packaging temperature should be +20°C and the ambient temperature should be between +5°C and +30°C. Before use, hold the can horizontally and shake well. Insert the straw into the valve. Use the foam by pressing the valve with the can upside down. Wetting the foam after application reduces the curing time and increases the bond strength.

Shelf Life

It is 15 months in its unopened original packaging, under appropriate storage conditions and at room temperature.

Warning

• It should be used in sufficiently ventilated environments.
• Use gloves while working.
• Keep away from flammable materials.
• The tube is under pressure; do not expose to direct sunlight and temperatures above 50°C.
• Keep out of reach of children.
• Low temperature reduces foam yield and increases curing time.
• Storage above +30°C or below -5°C may shorten shelf life.
• The box should be kept upright during storage and transportation.